Blizzard Snowplow 800HD Dokumentacja Pobierz pdf (Strona 12)

GENERAL INSTALLATION INSTRUCTIONS

FOR ALL HEADLIGHT CONVERSION HARNESSES

Verify the original vehicle equipment is in proper working order. Test the vehicle headlights

(high and low beam), turn signals and run lights. Verify fog lamps or other optional lighting

equipment is also in good working order if so equipped.

Remove the existing vehicle headlight connector from the headlight.

Plug the headlight conversion harness into the vehicle headlight receptacle. Note: If more than

one plug is present, match the colors of each connector (gray to gray, black to black,

Chevrolet daylight running: clear to gray, etc.).

Connect the existing vehicle headlight connector into the headlight conversion harness.

Plug the black connector on the headlight conversion harness into the connector on the

vehicle wire harness.

Verify the vehicle and plow headlights are in proper working condition, including the turn lights.

Adjust the plow headlight beams as needed.

NOTE: Ford changed their lights in 2004 on the F-150's and 2005 on the F-250-F-550's.

These vehicles do NOT require a separate conversion harness. Our new lighting harness

plugs directly into these lights and the truck harness. See following diagrams for the Ford's

and other vehicles.

Undercarriage & Light Conversion Harness Guide

Pub. No. 64008

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 47 48

Brak uwag

Blizzard Snowplow 800HD Dokumentacja Strona 12